Product of the Week
PRODUCT OF THE WEEK - EXTENDER
Are you painting in a dry climate or a space with low humidity? You may find your paint dries too fast. Buy yourself time with our uniquely formulated extender – simply add it to the paint to and you’ll have more time to brush back and forth to get the look you’re after. This can also be added to our Tough Coat Wipe on Poly for a minimal brush stroke look.
HOW TO USE IT
Add no more than 10% extender into your paint. Once mixed with Fusion Mineral Paint™, apply paint as usual. You will notice a longer open drying time, thus giving you time to work with the paint and smooth out brush strokes.
Once your first coat fully dries, apply a subsequent coat as needed. We recommend waiting at least 4 hours between coats when using the Extender. Should you notice that applying your second coat is lifting off the first, either too much extender was used, or it needs more time to dry and cure before applying another coat.
1 bottle is good for 2-4 pints. Adding more is not recommended as it will impact your drying and curing time.
Recommended ratio of 15 mL per pint (500 mL) of paint.
DID YOU KNOW?
Makes Fusion Mineral Paint™ and other water- based paints flow more smoothly
Reduces brush and roller marks
Reduces wear on spray guns
Cure time may increase depending on how much Extender is added.
WHAT ELSE CAN IT BE USED FOR?
Our Extender can be used with other water based paint products.
Add it to your Tough Coat for a longer open time and a smoother finish.
Metallics can dry fast adding Extender helps with a brush brushstroke- free finish.